MOSO® Asymmetrical Outdoor Decking Clip Fasteners "Clearance"
Marked for clearance due to package printing. Same Great Quality Fastener!
- Asymmetrical anchor lock
- Dimensions: 1-1/6" x 57/64" x 27/64"
- Size: 4.5 x 30mm screw
- Application: 20mm Decking | 18mm Siding
- Material: Stainless Steel
- Color: Brown
- 90pcs per box 2.37 pounds
Non-returnable
Packaging Data
Choose Quantity :
Product Information
Product Details
- Position the 1st board and leave a 20 mm / 3/4” gap from any permanent structure
- Pre-drill the 1st board with 4.5 mm drill hole 20 mm / 3/4” from the side of the board. Fix the exterior side of the 1st board, at every support joist, using stainless steel screws 5x50mm. (Alternatively the 1st boards may be fixed with Bamboo starter/ end clips.)
- Insert Bamboo fasteners into the groove channel of the 1st board at every sub frame joist. Fasten the screws using low torque and slow screwing speed on the screwing machine. A special square bit (S2) is provided. Perform some tests for correct torque speed adjustment before full installation. Depending on the joist material, you may need to pre drill before screwing. The drill bit should be 3.5 x 80 – 110 mm. The drill hole MUST at least be 30mm deep.
- Shift the next board against the clip using light force. Bamboo fasteners allow a 5 - 6 mm (3/16”) gap between the boards.
- Repeat steps 3, 4 and 5 until the last board. Pre-drill the last board with 4,5mm drill, 20 mm (3/4”) from the side of the board. Fix the exterior side of the 1st board, at every sub frame joist, using stainless steel screws 5 x 50 mm (Alternatively the exterior edge of the final row of boards may be fixed with Bamboo starter/end clips),
* Use special screws for aluminum or steel